Removing A Memory Upgrade Module; Checking The Memory Capacity - Fujitsu T5010 - LifeBook Tablet PC User Manual

Removing a Memory Upgrade Module

1
Perform steps 1 through 4 of Installing a
Memory Upgrade Module.
2
Pull the clips sideways away from each side of
the memory upgrade module at the same time.
3
While holding the clips out, remove the module
by lifting it up and pulling it away from your
Tablet PC.
4
Store the memory upgrade module in a static
guarded sleeve.
5
Replace the cover and reinstall the screws.

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your Tablet PC has recognized the change.
• If you are in Control Panel Home view, check the memory capacity by clicking [Start] -> Control
Panel -> System and Maintenance -> System -> View amount of RAM and processor speed. The
amount of memory is displayed next to "Memory - RAM:"
• If you are in Classic view, check the memory capacity by clicking [Start] -> Control Panel ->
System. The amount of memory is displayed next to "Memory - RAM:"
91 - Memory Upgrade Module
Figure 39. Removing a Memory Module