Replacing The Battery - Fujitsu T5010 - LifeBook Tablet PC User Manual

Tablet pc
Hide thumbs Also See for T5010 - LifeBook Tablet PC:
Table of Contents

Advertisement

Available languages

Available languages

Shorted Batteries
The Status Indicator panel indicator associated with the Battery Level indicator displays the operating
level available in that battery. If this display shows a flashing red LED, it means the battery is damaged
and must be replaced so it does not damage other parts of your LifeBook Tablet PC.

Replacing the Battery

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not
charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay, follow these easy steps (Figure 33):
1
Have a charged battery ready to install.
2
Shut down your Tablet PC and disconnect the AC adapter.
3
While pushing the battery bay release latches towards each other, slide the battery out of the bay.
4
Insert a new battery into the bay, and press it in firmly so that the latches click into place.
5
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
B
E SURE TO PLUG IN AN
BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED
AC A
USE AN
1
Plug an AC Adapter into the system and connect it to a power outlet.
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
DAPTER YOU WILL LOSE ANY UNSAVED FILES
82 - Lithium ion Battery
. T
HERE IS NO BRIDGE
.
. I
F YOU DO NOT

Advertisement

Chapters

Table of Contents
loading

Table of Contents