Modem (Rj-11) Jack - Fujitsu T5010 - LifeBook Tablet PC User Manual

Modem (RJ-11) Jack*

The modem (RJ-11) jack is used for an
internal modem. To connect the telephone
cable follow these easy steps:
1
Align the connector with the jack opening.
2
Push the connector into the jack until it is
seated.
3
Plug the other end of the telephone cable into a
outlet.
telephone
* Note that the modem device is present
only in non-WWAN models
T
HE INTERNAL MODEM IS NOT INTENDED FOR USE WITH
THE INTERNAL MODEM TO A
MODEM OR YOUR ENTIRE
MANUFACTURER
SURE TO FIND OUT
•
T
HE INTERNAL MODEM IS DESIGNED TO THE
BPS IS THE HIGHEST ALLOWED BY
CONDITIONS
•
T
HE INTERNAL MODEM ON ALL
ARE CERTIFIED FOR USE IN THE
D PBX
IGITAL AS IT MAY CAUSE SERIOUS DAMAGE TO THE INTERNAL
L B T5010 S
IFE OOK
'
S DOCUMENTATION FOR DETAILS
BEFORE
YOU CONNECT YOUR MODEM
FCC,
. T 33600
HE MAXIMUM SPEED IS
L B
IFE OOK
U
NITED
94 - Device Ports
Figure 41. Connecting a Modem
D PBX
IGITAL SYSTEMS
T PC. C
ERIES ABLET ONSULT YOUR
. S
OME HOTELS HAVE
.
ITU V.90 . I
STANDARD
AND ITS ACTUAL CONNECTION RATE DEPENDS ON THE LINE
.
BPS AT UPLOAD
T5010 S T PC'
ERIES ABLET
S C .
TATES AND ANADA
. D
O NOT CONNECT
PBX
D PBX . B
IGITAL SYSTEMS
53000
TS MAXIMUM SPEED OF
F A
S FROM UJITSU MERICA
E