Additional Information - HP 2000fc Replacement Instructions
Family modular smart array chassis and midplane replacement instructions
Hide thumbs
Also See for 2000fc:
- Reference manual (330 pages) ,
- Cli reference manual (282 pages) ,
- User manual (150 pages)
Advertisement
Installing I/O modules
1.
Loosen the controller's thumbscrews; press the latches downward.
2.
Slide the I/O module into the enclosure as far as it will go (1).
3.
Press the latches upward to engage the I/O module (2); turn the
thumbscrews finger-tight.
Verifying component installation
•
Reconnect cables and power on the system and associated data
host in the following order:
a. Drive enclosure first
b. Controller enclosure next
c. Data host last
•
On the power-and-cooling modules, check that the AC Power
Good LED (top) is on.
•
On the controller and I/O modules, check that the OK LED
(back) illuminates green, indicating that the module has
completed initializing and is online.
Additional information
See the MSA web site: http://www.hp.com/go/msa.
1
2
2
Page 4
Advertisement
