Accessing The Cee Cli Through The Console Or Telnet; Accessing The Cee Cli From The Fabric Os Shell; Cee Cli Command Modes; Figure 2 Cee Cli Command Mode Hierarchy - Brocade Communications Systems 1606 Administrator's Manual

Accessing the CEE CLI through the console or Telnet

NOTE
While this example uses the admin role to log in to the switch, any role listed in the
permissions"
The procedure to access the CEE CLI is the same through either the console interface or through a
Telnet session; both access methods bring you to the login prompt.
switch login: admin
Password:
switch:admin> cmsh
switch#
To return to the Fabric OS CLI, enter the following command.
switch#exit
switch:admin>
NOTE
Multiple users can Telnet and issue commands using the Exec mode and the Privileged Exec mode.

Accessing the CEE CLI from the Fabric OS shell

To enter the CEE CLI from the Fabric OS shell, enter the following command.
switch:admin> cmsh
switch#
To return to the Fabric OS shell, enter the following command.
switch#exit
switch:admin>

CEE CLI command modes

Figure 2
FIGURE 2
Interface configuration
10-Gigabit Ethernet
Table 3
Converged Enhanced Ethernet Administrator's Guide
53-1001761-01
DRAFT: BROCADE CONFIDENTIAL
section can be used.
displays the CEE CLI command mode hierarchy.
CEE CLI command mode hierarchy
EXEC
Privileged EXEC
Global configuration
Protocol configuration
Port-channel
LLDP
Spanning-tree
VLAN
lists the CEE CLI command modes and describes how to access them.
CEE Command Line Interface
Console and VTY (line)
CEE CLI features
configuration
CEE map Console
ACLs Virtual terminal
2
"CEE CLI RBAC
15