Brocade Communications Systems 1606 Administrator's Manual page 140

11
Monitoring IGMP
Example
3. Use the show ip igmp statistics command to display the IGMP statistics for a VLAN or interface.
Example
4. Use the show ip igmp mrouter to display multicast router (mrouter) port related information for
Example
5. When you have reviewed the IGMP statistics for the switch, refer to
118
DRAFT: BROCADE CONFIDENTIAL
Use this command to display the IGMP database, including configured entries for either all
groups on all interfaces, or all groups on specific interfaces, or specific groups on specific
interfaces.
switch#show ip igmp groups
switch#show ip igmp snooping statistics interface vlan 1
all VLANs, or a specific VLAN.
switch#show ip igmp snooping mrouter
- or -
switch#show ip igmp snooping mrouter interface vlan 1
page 116 or "Configuring IGMP snooping querier"
corrections.
NOTE
Refer to the CEE Command Reference for additional information on IGMP CLI commands.
"Configuring IGMP"
on page 117 to make any needed
Converged Enhanced Ethernet Administrator's Guide
on
53-1001761-01