Opening Web Tools
You can open Web Tools on any workstation with a compatible Web browser installed. For a list of
Web browsers compatible with Fabric OS 6.3.0, refer to
HTTPS protocol.
Use the following procedure to open Web Tools.
1. Open the Web browser and type the IP address of the device in the Address field:
2. Press Enter.
Web Tools Administrator's Guide
53-1001343-01
http://10.77.77.77
or
https://10.77.77.77
A browser window opens to open Web Tools. A login dialog box opens. Refer to
page 12 for more information. If you are using Firefox, the browser window is left open. You can
close it anytime after the login dialog box displays. If you are using Internet Explorer, the
browser window automatically closes when the login dialog box displays.
If you have installed EZSwitchSetup on your workstation, the EZSwitchSetup Switch Manager
displays the first time you access the device. EZSwitchSetup provides an easy to use wizard
interface that may be used to simplify the initial setup procedure for smaller switches. Refer to
EZSwitchSetup Administrator's Guide for information about the EZSwitchSetup interface.
If you want to use Web Tools instead of EZSwitchSetup, click Advanced Management in the
lower-left corner of the window to open the Web Tools interface. This book describes only the
Web Tools interface.
Opening Web Tools
Table
3. Web Tools supports both HTTP and
1
"Logging in"
on
11