Deleting Port Groups; Defining Custom Primary And Secondary Mapping - Brocade Communications Systems 1606 Administrator's Manual

12
Port configuration
8. Under the Select Members(N-Port)* section, select the required ports you want to group and
9. Click Save.
10. Click Close on the Port Group Configuration dialog box.

Deleting port groups

Use the following procedure to delete port groups.
NOTE
You cannot delete the default port group 0 (pg0).
1. Click a port in the Switch View to open the Port Administration window.
2. Click Configure N_Port Groups.
3. On Port Group Configuration dialog box, select the group that you want to delete and then click
4. Click Yes to confirm the action.
5. Click Close.

Defining custom primary and secondary mapping

Use the following procedure to manually change port mappings.
1. Click a port in the Switch View to open the Port Administration window.
2. Click the FC Ports tab.
3. Click Configure F_N Port Mappings.
184
clear the check boxes for the ports you want to remove from the port group.
Delete.
A confirmation dialog box displays.
Web Tools Administrator's Guide
53-1001343-01