System Group - Brocade Communications Systems 1606 Reference

2

System group

System group
All systems must implement the System group. If an agent is not configured to have a value for any
of the System group variables, a string of length 0 is returned.
sysDescr 1.3.6.1.2.1.1.1
A textual description of the entity. This value should include the full name and version identification
of the hardware type, software operating system, and networking software.
Format This must contain only printable ASCII characters.
Set command Set this value using the snmpconfig command.
Default The switch type. The default value is either Fibre Channel Switch or Access Gateway.
sysObjectID 1.3.6.1.2.1.1.2
The vendor's authoritative identification of the network management subsystem contained in the
entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy
and unambiguous means for determining what kind of device is being managed.
Example If a vendor "NetYarn, Inc." was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier
1.3.6.1.4.1.4242.1.1 to its "Knit Router".
Default The device type. The default value is either:
•
•
sysUpTime 1.3.6.1.2.1.1.3
The time (in hundredths of a second) since the network management portion of the system was
last reinitialized.
Set command Set this value using the switchuptime command.
sysContact 1.3.6.1.2.1.1.4
The textual identification of the contact person for this managed node, together with information
on how to contact this person. The minimum length of the string must be 4.
Default Field Support
Set command Set this value using the snmpconfig command.
24
Fibre Channel Switches:
iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcSwitch.sw
Brocade Access Gateway:
iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcSwitch.sw
Fabric OS MIB Reference
53-1001339-01