Brocade Communications Systems 1606 Administrator's Manual page 516

21
Interfabric link configuration
8. After identifying such ports, enter the portCfgPersistentEnable command to enable the port,
9. Enter either the portCfgEXPort or portShow command to verify that each port is configured
474
EX Port
Mirror Port
FC Fastwrite
and then the portCfgShow command to verify the port is enabled.
switch:admin> portcfgpersistentenable 7/10
switch:admin> portcfgshow 7/10
Area Number:
Speed Level:
Trunk Port
Long Distance
VC Link Init
Locked L_Port
Locked G_Port
Disabled E_Port
ISL R_RDY Mode
RSCN Suppressed
Persistent Disable
NPIV capability
EX Port
Mirror Port
FC Fastwrite
correctly:
switch:admin> portcfgexport 7/10
Port 7/10 info
Admin:
State:
Pid format:
Operate mode:
Edge Fabric ID:
Preferred Domain ID:
Front WWN:
Fabric Parameters:
R_A_TOV:
E_D_TOV:
Authentication Type: None
DH Group: N/A
Hash Algorithm: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
switch:admin_06> portshow 7/10
portName:
portHealth: OFFLINE
Authentication: None
EX_Port Mode: Enabled
Fabric ID: 30
Front Phantom: state = Not OK
Fabric params: R_A_TOV: 0
ON
ON
ON
74
AUTO
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
enabled
NOT OK
Not Applicable
Brocade Native
30
160
50:06:06:9e:20:38:6e:1e
Auto Negotiate
Not Applicable
Not Applicable
Pref Dom ID: 160
E_D_TOV: 0 PID fmt: auto
Fabric OS Administrator's Guide
53-1001336-01