Related Manuals for Daktronics BB-2161
Summarization of Contents
Introduction
Important Safety Instructions
Essential safety guidelines for installation and operation of the shot clocks to prevent injury.
Specifications Label
Details on finding model, serial, and manufacturing date information on the product label.
Resources
Guidance on how to interpret drawing numbers and locate other essential documentation.
Daktronics Nomenclature
Explanation of part labeling conventions used by Daktronics for identification.
Control Console
Information on the control console used with the shot clocks and related manuals.
Specifications
Key mechanical and power specifications for the different shot clock models.
Mechanical Installation
Lifting the Display
Recommended procedures and precautions for safely lifting the shot clock display unit.
Shot Clock Mounting
Instructions and references for physically mounting the BB-2160 and BB-2161 shot clocks.
Control Enclosure Mounting
Guidelines for securely mounting the control enclosure near the shot clock.
Remote Horn Enclosure Mounting
Instructions for mounting the remote horn enclosure in an optimal location for sound.
Camera Mounting
Information on mounting optional cameras with the shot clock system.
Electrical Installation
Warnings and Disclaimers
Crucial warnings regarding electrical work, codes, and potential hazards.
Installation Overview
General approach to routing power and control signal wiring for the system.
Power
Requirements and procedures for connecting power to the shot clock system.
Grounding
Critical information on proper grounding methods for safety and reliability.
Power-On Self-Test (POST)
Explanation of the automatic self-test performed by the display upon power-up.
Radio Settings
How to configure radio settings for wireless control if a receiver is installed.
Signal Connection
Detailed steps for connecting the control console signal to the shot clock system.
Radio Control
Information on setting up optional wireless control via a 2.4 GHz radio system.
Backboard Light Strips
Guidance on installing and configuring LED backboard light strips.
Tenth-Second Shot Time
How to enable and configure the display of tenths of a second on the shot time.
Troubleshooting
Troubleshooting Table
A table listing common problems, their causes, and suggested solutions for the shot clocks.
Component Access and Digit Replacement
Instructions on how to access internal components and replace display digits.
Schematics
References to schematic drawings for detailed troubleshooting and repair information.
LED Driver
Explanation of the LED driver's function and its role in display operation.
Replacing a Driver
Step-by-step guide on how to replace a faulty LED driver unit.
Setting the Driver Address
How to configure the correct address for LED drivers used in various display models.
Switch Settings
Information on configuring DIP switches for horn activation and light strip control.
Replacement Parts
A list of common replacement parts with their corresponding part numbers.
Daktronics Exchange and Repair & Return Programs
Exchange Program
Details on Daktronics' service for quickly replacing key components needing repair.
Repair & Return Program
Procedure for sending parts to Daktronics for repair when not eligible for exchange.
Need help?
Do you have a question about the BB-2161 and is the answer not in the manual?
Questions and answers