Related Manuals for ABB EMAX E4.2 Series
Summarization of Contents
EMAX2 Circuit Breaker Adaptation Diagrams
Circuit Breaker and Switch-Disconnector Diagrams
Diagrams of main breaker and switch-disconnector components.
Emax.2 Measurement Enabler Configurations
Diagrams for Emax.2 measurement enablers with various voltage inputs.
Current and Ground Fault Protection Inputs
Diagrams for residual current and ground fault protection sensor inputs.
Zone Selectivity and Auxiliary Supply Diagrams
Diagrams for zone selectivity and auxiliary supply connections.
EKIP Signalling and Temperature Monitoring
Diagrams for EKIP signalling modules and temperature monitoring.
Standard Communication Modules
Diagrams for Ekip Com modules like Modbus, Profibus, Profinet.
Link Bus and HUB Communication
Diagrams for Link Bus and HUB communication interfaces.
Redundant Communication Modules
Diagrams for redundant communication modules.
Opening and Undervoltage Coil Diagrams
Wiring diagrams for opening and undervoltage coils.
Opening Coils with Electronic Control
Diagrams for opening coils controlled by electronic trip units.
Closing Coils and Position Signaling
Diagrams for closing coils and circuit-breaker position signaling.
Graphical Symbols Reference
Comprehensive list of graphical symbols used in electrical diagrams according to IEC 617 standards.
Legend and Operating State
Defines abbreviations, terms, and operating states shown in the diagrams.
Adaptation and Installation Notes
Provides important notes regarding the adaptation and installation of EMAX2 circuit breakers.
Need help?
Do you have a question about the EMAX E4.2 Series and is the answer not in the manual?
Questions and answers