HP 381513-B21 - Smart Array P800 Controller RAID User Manual page 8

Reconnect peripheral devices and the AC power supply to the server.
10.
Power up peripheral devices.
11.
Power up the server.
12.
Update the controller firmware
13.
(Optional) Set this controller as the boot controller using ORCA
14.
controller" on page 14).
(Optional) Change the controller boot order using RBSU
15.
If the controller will not be the boot device, install the device drivers
16.
page 16).
If new versions of the Management Agents are available, update the Management Agents
17.
("Installing Management
(Optional) Create additional logical drives
18.
The server is now ready to use.
("Methods for updating the
Agents" on page 16).
("Configuring an
firmware" on page 12).
("Setting a controller as the boot
("Setting the controller order" on page 14).
("Installing device
array" on page 13).
Overview of the installation procedure 8
drivers" on