Electrical Characteristics; Thermal And Atmospheric Characteristics; Safety Characteristics; Table 7. Electrical Characteristics - Intel SRCSAS18E - RAID Controller User Manual

Electrical Characteristics

This section provides the power requirements for the RAID Controller SRCSAS18Es.
Table 7 lists the maximum power requirements.
Storage
Adapter
RAID
Controller
SRCSAS18E

Thermal and Atmospheric Characteristics

For the Intel
are:
• Relative humidity range: 5% to 90% non-condensing
• Maximum dew point temperature: 32 C
• Airflow must be at least 300 linear feet per minute (LFPM) to avoid operating the
80333 processor above the maximum ambient temperature
The following parameters define the storage and transit environment for the RAID
Controller SRCSAS18E:
• Temperature range: 40 C to +105 C (dry bulb)
Note:
• Relative humidity range: 5% to 90% non-condensing
Note:

Safety Characteristics

The RAID Controller SRCSAS18E meets or exceeds the requirements of UL
flammability rating 94 V0. Each bare board is also marked with the supplier name or
trademark, type, and UL flammability rating. For the boards installed in a PCI bus slot, all
voltages are lower than the SELV 42.4 V limit.
23

Table 7. Electrical Characteristics

PCI /
PCI Express* /
Express +12 V
115 mA; used only
if battery is present
®
RAID Controller SRCSAS18E, the thermal and atmospheric characteristics
The maximum operating temperature decreases to +45 C when the Intel
RAID Portable Cache Module 2 battery backup unit is installed.
The maximum operating temperature decreases to +45 C when the Intel
RAID Portable Cache Module 2 battery backup unit is installed.
PCI / PCI /
PCI Express PCI Express /
+5.0 V Express+3.3 V
1.5 A (PCI N/A
only)
Intel® RAID Controller SRCSAS18E User's Guide
PCI
PRSNT1# / Operating
PRSNT2# Range
Power
15 W 0 °C to
55 °C
®
®