Using Acu; Using Cpqonlin - HP 273914-B21 - Smart Array 6404/256 RAID Controller User Manual

28 HP Smart Array 6400 Series Controllers User Guide
You can now create another logical drive by repeating the previous steps.

Using ACU

For detailed information about using ACU, refer to the HP Array Configuration
Utility User Guide. This document is available on the Documentation CD that is
provided in the controller kit.

Using CPQONLIN

The NetWare Online Array Configuration Utility (CPQONLIN) is an NLM that
enables you to configure drive arrays on a NetWare server without powering
down the server or storage system. CPQONLIN also provides information about
the status of drives attached to the controller.
To run CPQONLIN:
1. Use the software CD provided with the controller to load the drivers
(HPQCISS.HAM and CPQSHD.CDM) and the executable
(CPQONLIN.NLM) on the server. Detailed instructions are provided with the
CD.
2. Enter cpqonlin at the console prompt.
3. Use the arrow keys to highlight the Array Configuration Utility menu item,
and then press the Enter key.
4. From the list of controllers that is presented, select the one that you want to
configure.
NOTE: Newly created logical drives are invisible to the operating
system. To make the new logical drives available for data storage,
format them using the instructions given in the operating system
documentation.
If there are no logical drives connected to the controller, an auto-
configuration wizard opens and prompts you for fault-tolerance
information.