Compaq 226593-B21 - Smart Array 5i RAID Controller User Manual page 137

Index
stripe size 7-14
linear memory 5-6
load balancing, defined C-7
logical drive
capacity extension 7-21
capacity extension, description of D-12
compared to array C-3
creation of, with ACU 7-20
creation of, with CPQONLIN 7-31
creation of, with ORCA 7-3
defined C-2
enlarging D-11
failure D-2, D-5, E-1
identifying, using ACU 7-8
maximum number of, per array 7-4,
7-14
maximum size of 7-14
partitioning of 7-25
recovery of, options for D-5
LVDS (Low Voltage Differential Signaling),
support for 1-5
M
manual configuration of array
with ACU 7-17
with CPQONLIN 7-28
maximum number of
logical drives per array 7-4
online spares per array 7-1
memory
allocation, to cache, in ACU 7-11
allocation, to cache, in
CPQONLIN 7-32
features 1-4
linear 5-6
required amount of, for stripe size
change 7-25
migration
in ACU 7-25
in CPQONLIN 7-34
time required for 7-25
mirroring of drives C-6
Index-6 Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide
mouse compliance statement A-4
multiple logical drives, creating 7-14
N
NetWare
ACU and 7-5
array configuration utility for 7-26
Block Sub-Allocation in 5-6
capacity extension in, using ACU 7-24
CPQONLIN and 7-26
creating volume in 5-6
linear memory in 5-6
optimizing controller performance
in 5-6
partition in, creating 5-6
NetWare Online Array Configuration
Utility See CPQONLIN
NiMH batteries 1-2
no fault tolerance (RAID 0) C-5
O
online capacity extension, operating systems
supporting 7-24
online configuration using ACU 7-5
online drive capacity upgrade D-11
online spare
activation of 1-6
adding 7-17, 7-30
defined C-5
limitations of 7-1, C-5
number allowed per array 7-1
use of, with alternative fault-tolerance
methods C-11
operating systems supported by
controller 1-1
Options ROMPaq
creating diskettes 5-3
overview of 5-1
running from CD 5-2
ORCA (Option ROM Configuration for
Arrays)