Installing The Raid Adg Enabler Module - Compaq 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual
Advanced data guarding for the smart array controller
Hide thumbs
Also See for 166207-B21 - Smart Array 5302/32 RAID Controller:
- Reference manual (23 pages) ,
- User manual (163 pages) ,
- Technology brief (9 pages)
Table of Contents
Advertisement
Figure 2-2. Aligning the module on the controller board
Installing the RAID ADG Enabler Module
To install the RAID ADG Enabler Module:
1. Perform the preliminary steps described earlier in this chapter.
2. Ensure that the Array Accelerator on your Smart Array 5300 controller
has at least 64 MB of read/write cache.
3. Hold the module at an angle and insert the rear end of the module into
the appropriate slot 1.
1
Figure 2-3. Installing the module
2
a
b
Installation 2-3
Advertisement
Table of Contents
Need help?
Do you have a question about the 166207-B21 - Smart Array 5302/32 RAID Controller and is the answer not in the manual?
Questions and answers