Chapter 2, Intel Raid Controller Rs2Bl040 Hardware Installation; Requirements; Installing The Raid Controller - Intel RS2BL040 - Raid Controller Hardware User's Manual
Hardware user guide
Hide thumbs
Also See for RS2BL040 - Raid Controller:
- Tested hardware and operating system list (23 pages) ,
- Configuration manual (5 pages)
Table of Contents
Advertisement
2
Intel
Hardware Installation
Requirements
•
An Intel
•
A host system with an available x8 or x16 PCI-Express* slot
•
The Resource CD, which contains drivers and documentation
•
SAS or SATA 3.0 hard drives
Note: SATA II is the only type of SATA supported by this RAID Controller.
In addition, Intel Corporation strongly recommends using an uninterruptible power supply
(UPS).
Installing the RAID Controller
To install the RAID Controller, follow these steps:
1. Turn off the power to the system, all drives, enclosures, and system components.
Remove the power cord(s).
2. Remove the server system cover. For instructions, see the server system
documentation.
3. If necessary, change the bracket on the RAID controller to fit the height of the
server system (see
Intel® RAID Controller RS2BL040 Hardware User's Guide
®
RAID Controller RS2BL040
®
RAID Controller RS2BL040 with the provided cables
Figure
1).
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RS2BL040 - Raid Controller and is the answer not in the manual?
Questions and answers