System Connections; Maintenance - RCA RS22163CP User Manual

1. CONNECTING THE SPEAKERS
Connect the wires to the speaker terminals.
Note: Connecting speakers other than the speakers supplied with the unit, may damage the unit.
2. USING THE AC ADAPTER
Before use, make sure that the rated voltage of
your AC adapter matches your local voltage. Make
sure both speakers are connected correctly before
plugging the AC adapter cord into the AC power
outlet.
3. CONNECTING WITH OTHER OPTIONAL EQUIPMENT
Listening to the Audio Signals from the External Equipment
1) Connect the AC adapter to the AC power outlet.
2) Slide the FUNCTION selector to the LINE IN position.
3) Connect a 3.5mm-to-3.5mm audio cable (not included) to the LINE IN jack on the front of unit and the
AUDIO OUT/HEADPHONE jack of your portable device.
4) Turn on your audio equipment and play the external source.
CLEANING THE DISC
If the CD skips or will not play, the
disc may need to be cleaned.
Before playing, wipe the disc from
the center outward with a cleaning
cloth. After playing, store the disc
in its case.
CLEANING THE TAPE HEADS
To maintain optimum sound
quality, clean the playback/
record heads (a), erasure head
(b), pinch roller (c), and capstans
(d) regularly (every 10 hours of
use). Use a cotton swab lightly
moistened with cleaning fluid or
denatured alcohol.

SYSTEM CONNECTIONS

Audio Cable
(not supplied)

MAINTENANCE

CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by
lightly wiping with a soft cloth.
IMPORTANT NOTE
• If an abnormal display indication or an operating
• Before transporting the unit, remove all discs from
EN - 3
AC adapter
To AUDIO OUT or
HEADPHONE jack
problem occurs, disconnect the AC adapter. Wait
at least 5 seconds, then reconnect it.
the disc compartment.
To AC
Power
Outlet
Portable Audi o