Line-In - Sonos MULTI-ROOM MUSIC SYSTEM User Manual

Chapter 9: The Sonos® Controller 100
Selecting a radio station
Note: Some SIRIUS radio stations contain adult content that may not be
suitable for children under 18. If you would like to remove the SIRIUS 30-day
trial from your Sonos music system after you activate it, please see "Removing a
music service trial" on page 9-17.
From the Music menu, select SIRIUS and press OK. (If you are using the
1.
SIRIUS Radio trial, select Music Service Trials>SIRIUS Internet Radio Trial
instead).
Your SIRIUS radio stations are displayed.
Use the scroll wheel to select a radio station, and press OK.
2.
Note: SIRIUS allows playback of one radio channel at a time in your
household. This means that if you are listening to SIRIUS in your home office,
and someone in the kitchen starts a different SIRIUS channel, the SIRIUS
channel in your home office will stop playing.

Line-In

From the Music menu, select Line-In Sources and press OK.
• To play music from this source, highlight it and press OK.
• To change the name of the component, highlight it and select Edit Name.
Choose a new name from the list, and press OK.
• To change the line-in level for this component, highlight it and select Edit Line
Level. Choose the line-in level appropriate for this device, and press OK.
A default (typical) line-in level is automatically assigned when you select a
source name. If the volume sounds too low, you can select a higher line level for
this device. You may experience clipping at higher volume levels if you set the
level too high.
To change the line-in encoding for these components, see "Line-In encoding" on
page 9-35.
9-27