Sleep Modes - Sonos MULTI-ROOM MUSIC SYSTEM User Manual

Chapter: The Sonos® Controller 200 5-5
(Your Controller will awaken in a matter of seconds after you place it into the cradle.
In a rare, but still normal case, your Controller may need a few minutes to wake up.)
2
1
After at least one ZonePlayer has been set up, follow the instructions on the
Controller's screen to add this Controller to your Sonos Multi-Room Music
System.

Sleep Modes

Light Sleep
Your Controller will go into light sleep to preserve the battery life when it is unused
for a specified period of time. The screen will turn off until motion is detected or a
button is pressed. Use the Sleep Timer Docked (Controller is connected to power
supply) and Undocked (Controller is not connected to power supply) settings to
select the amount of time after which your Controller will enter light sleep.
Deep Sleep
Your Controller will go into deep sleep to preserve the battery life when it is unused
for a specified period of time. When your Controller wakes from deep sleep - either
from the motion sensor or from a button press - it will go through a restart cycle that
takes several seconds. Use the Deep Sleep Timer setting to select the amount of
time after which your Controller will enter deep sleep.