MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION MX Manual page 109

-nodupdetect
Type: Web crawling only
Disables checksum-based detection of duplicates when indexing websites. URL-based duplicate
detection is still performed.
By default, a document checksum is computed based on the CRC-32 algorithm. The checksum
combined with the document size is used to determine if the document is a duplicate.
See also .
-followdup
-noindex
Specifies that Verity Spider gathers document locations without indexing them. The document
locations are stored in a bulk insert file (BIF), which is then submitted to the collection. This
option is typically used in conjunction with a separate indexing process, such as
collection servicers (
collsvc
collection, whether it is Verity Spider, mkvdk, or collection servicers (
Do not try to start Verity Spider and another process at the same time. You must allow Verity
Spider time to generate enough work for the secondary indexing process. If you are using
you can run it in persistent mode to ensure it will act upon work generated by Verity Spider.
Note: When you execute an indexing job for a collection and you use the
persistent store for the collection is not updated.
See also and
-nocache
For more information on the mkvdk utility, see
mkvdk Utility," on page
-nosubmit
Specifies that Verity Spider gathers document locations without submitting them. The document
locations are stored in a bulk insert file (BIF), which is not submitted to the collection. This
option is typically used in conjunction with a separate indexing process, such as
collection servicers (
collsvc
option. With an indexing process other than Verity Spider, you must specify the name and path
for the BIF, because the collection has no record of it.
-persist
Syntax:
-persist num_seconds
Enables the Verity Spider to run in persistent mode, checking for updates every num_seconds
seconds until it is stopped.
While Verity Spider is running in persistent mode, there is no optimization. After Verity Spider is
taken out of persistent mode, you need to perform optimization on the collection. For more
information about using the mkvdk utility, see
mkvdk Utility," on page
Note: Do not run more than one Verity Spider process in persistent mode. As the Verity Spider is a
resource-intensive process, only run it in persistent mode with an interval of less than one day. For
time intervals greater than twelve hours, use some form of scheduling. Some examples are cron jobs
for UNIX, and the AT command for Windows server.
). The BIF will be processed by the next indexing process run for the
.
-nosubmit
89.
). You can also use Verity Spider again with the
89.
Chapter 8, "Managing Collections with the
Chapter 8, "Managing Collections with the
or
mkvdk
).
collsvc
mkvdk
option, the
-noindex
or
mkvdk
-processbif
Processing options
,
109