Related Manuals for FieldServer QuickServer FS-QS-2010
Summarization of Contents
Supplied Equipment
BTL Mark - BACnet Testing Laboratory
Explains the BTL Mark's significance for BACnet product quality.
LonMark Certification
Details LonMark International's role in product certification and interoperability.
Mounting
Dimensions
Provides dimension drawings for various QuickServer models (FS-QS-1X10, FS-QS-1X11, FS-QS-12XX).
Wiring
Details power supply connection and jumper settings for the QuickServer.
Specifications
Outlines technical specifications including ports, power, approvals, dimensions, and environment.
Installing the QuickServer
RS-485
Details RS-485 connection options for R2 and R1 ports on the QuickServer.
QuickServer LonWorks
Instructions for connecting the QuickServer to a LonWorks network.
QuickServer KNX
Instructions for connecting the QuickServer to a KNX bus.
RS-232 Connection R2 Port
Describes RS-232 connection for the R2 port on FS-QS-12XX models.
Configure the DIP Switches
Explains how to configure DIP switches for Baud Rate, Node-ID, and MAC address.
Operation
Power up the device
Instructions for applying power to the QuickServer device.
Connect the PC to the QuickServer over the Ethernet port
Steps to establish an Ethernet connection between a PC and the QuickServer.
Connecting to the QuickServer
Details methods for connecting to the QuickServer using the Toolbox application.
Set IP Address of the QuickServer
Guides on setting the QuickServer's IP address via Toolbox or Web GUI.
Configuring the QuickServer
Retrieve the Sample Configuration File
Instructions on how to retrieve the default configuration file (CONFIG.CSV).
Change the Configuration File to Meet the Application
Guidance on modifying the configuration file for application-specific needs.
Load the Updated Configuration file
Steps for loading a new configuration file using Toolbox or Web GUI.
Test and Commission the QuickServer
Procedures for testing and commissioning the configured QuickServer.
Appendix A Useful Features
QuickServer DIP Switch configuration
Details how to configure the QuickServer using its DIP switches.
RS-422 Connection R2 Port
Explains the RS-422 connection for the R2 port on specific QuickServer models.
KNX Connection R2 Port
Describes the KNX protocol connection for the R2 port.
M-Bus Connection R2 Port
Details the M-Bus protocol connection for the R2 port.
Enhanced Network Security
Information on disabling RuiNet access for enhanced network security.
Appendix B Troubleshooting Tips
Communicating with the QuickServer over the Network
Troubleshooting network communication problems with the QuickServer.
Technical support
Guidance on contacting technical support and providing necessary diagnostic information.
Notes Regarding Subnets and Subnet Masks
Explains IP addressing and subnet mask limitations for the QuickServer.
Appendix D Reference
LED Functions
Explains the meaning and behavior of the QuickServer's status LEDs.
FS-QS-1010-XXXX LED's
Specific LED functions for the FS-QS-1010-XXXX model.
FS-QS-1011-XXXX LED's
Specific LED functions for the FS-QS-1011-XXXX model.
QuickServer FS-QS-101X DCC
Lists Driver Configuration Codes (DCC) for FS-QS-101X models.
Compliance with UL Regulations
Outlines requirements for UL compliance when operating the QuickServer.
Address DIP Switch Settings
Detailed tables showing address settings for DIP switches A0-A7.
Baud DIP Switch Settings
Tables detailing Baud Rate settings for DIP switches B0-B3.
Need help?
Do you have a question about the QuickServer FS-QS-2010 and is the answer not in the manual?
Questions and answers