Download Print this page

Advertisement

Quick Links

For cleaning and disinfection, only the following maintenance items are extracted.
20.3 Preventive Maintenance Performed by the User
OPERATION MANUAL
DIAGNOSTIC ULTRASOUND SYSTEM
/
MODELS TUS-AI900/TUS-AI800/TUS-AI700
[FUNDAMENTALS]
(2B771-447EN*F)
In the USA, federal law restricts this device to sale
and use by or on the order of a physician.
Read and understand this manual before operating
the equipment. After reading, keep this manual in
an easily accessible place.
CANON MEDICAL SYSTEMS CORPORATION 2020-2021
ALL RIGHTS RESERVED
FOR
/
CAUTION:
IMPORTANT!
No. 2B771-447EN*F
Issued : 2021-10

Advertisement

loading
Need help?

Need help?

Do you have a question about the Aplio i700 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Preventive Maintenance Performed by the User
Cleaning the transducer
Clean, disinfect, and sterilize the transducer as per its operation manual.
Cleaning the transducer holder and gel holder
Wipe stains from the transducer and gel holder using a dry or mildly dampened soft cloth.
Cleaning the reference signal cable
Clean the reference signal cable with specified solutions, dry without heat, and check for damage.
Cleaning the ECG limb clips
Clean ECG limb clips, remove organic materials, and dry without heat, checking for damage.
Cleaning the PCG sensor and pulse sensor
Clean PCG and pulse sensors with specified solutions, dry without heat, and inspect for damage.
Cleaning the monitor
Clean monitor cover and LCD screen with soft cloth, mild detergent, avoiding force and stiff materials.
Cleaning the touch panel
Clean touch panel surface with a lens cleaning cloth or a lightly dampened soft cloth.
Cleaning system, main panel, and transducer connector
Wipe system, main panel, and transducer connector with soft cloth and mild detergent or water.
Cleaning the trackball
Disassemble, clean, and reassemble the trackball carefully for proper function and rotation.
Cleaning the air filter
Remove air filter, clean dust with vacuum away from system, and remount securely.
Disinfection procedures
Perform disinfection by powering off, wearing gloves, cleaning, applying disinfectant, rinsing, and drying.