6
8911 AES/EBU Reclocking Digital Audio Distribution Amplifier
Key Features
•
Differential looping input offers excellent
common mode rejection (CMR)
•
Eight outputs
•
Accepts 48, 44.1, and 32 kHz
•
Reclocking removes jitter induced by long
cable runs
Note: for balanced 110Ω requirements see
the 8912 series digital audio distribution
amplifiers
Specifications
Supported Frame Types
GeckoFlex with 8900V-R GeckoFlex Video rear module,
Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating
3 Watts – single slot
Input
Number of inputs: One differential loopthrough
Connector: High Z
Standard: AES-3id-1995 and SMPTE 276M
Return loss: >25 dB (0.1 to 6 MHz)
CMRR: 60 dB @ 50/60 Hz
Output
Number of outputs: Eight
Connector: 75Ω BNC
Standard: AES-3id-1995 and SMPTE 276M
Return loss: >25 dB (0.1 to 6 MHz)
The amount of digital audio is ever increasing
as studios and broadcast facilities transition
to digital. The 8911 offers a low-cost method
of reclocking AES/EBU digital audio signals to
ensure signal integrity. Best of all, the 8911
fits into our 8900-V series Gecko frames or
into a GeckoFlex frame with an 8900V-R
rear module, which boast passive differential
loopthrough inputs, high density, and a wide
range of distribution and format conversion
functions.
Rx
Digital
Audio
Input
Performance
Sample rates: 48 kHz, 44.1 kHz, and 32 kHz
Operating temperature: 0°C to 45°C ambient
Relative humidity: 0% to 90% non-condensing
Indicators and Controls
Indicators: Input audio present, power
8900V-R
J1
J3
Outputs
J5
J7
J9
Loopthru
Reclocker
Phase
Lock
Loop
Ordering Information
This module can be mounted in a GeckoFlex
frame when ordered with the 8900V-R GeckoFlex
Video rear module.
8911
AES/EBU reclocking digital audio distribution amplifier
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular
J2
J4
Outputs
J6
J8
J10
Input
AES
Outputs