Related Manuals for TDS TAC BLACK
Summarization of Contents
Introduction
Product Description
Tds equipment is mounted as a complete regulator (1st, 2nd stage and hose) and as 1st and 2nd single stages. Their names are OCEANUS, PROTEUS, GULL BLACK and TAC BLACK.
Preparation and Configuration
Assembly of the First Stage in the Bottle Valve
Instructions for attaching the first-stage regulator to a scuba bottle valve, covering INT type connectors and necessary checks.
Pre-Dive Verifications
Procedure for checking hoses, regulator condition, pressure gauge, and hose orientation before diving.
Pressurize Regulator
Steps for safely pressurizing the regulator, checking for leaks, and verifying airflow and pressure.
Diving with the Regulator
Use as Octopus
Guidance on using the octopus regulator, including preventing foreign object intrusion and handling free-flow.
Diving in Cold Water
Recommendations and precautions for diving in cold water (below 10°C) to prevent regulator freezing and ensure safety.
After the Dive
Removal of the Regulator in the Bottle
Procedures for safely removing the regulator from the scuba tank, including rinsing and depressurizing steps.
Cleaning
Recommended procedures for cleaning the second stage regulator using FDA-approved solutions.
Inspection and Service
Scheduled Service Exceptions
Guidelines for servicing frequency based on annual dive count, with examples of inspection and review cycles.
Brands and Abbreviations
Explanation of markings, certifications (EN250, CE0426), and serial number conventions for regulators and hoses.
Warranty Information
Requirements for warranty claims, emphasizing the need for original proof of purchase from an authorized distributor.
Limited Lifetime Warranty
Details the TDS warranty coverage for original purchasers against defects in material and workmanship throughout the product's lifetime.
Need help?
Do you have a question about the TAC BLACK and is the answer not in the manual?
Questions and answers