Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS:
(1) 5/8" X 6.5" STUD
(2) 5/8" FLAT WASHERS
AND (2) 5/8" LOCK NUTS
(6) 3/8" X 1" BOLTS
& (6) 3/8" FLAT WASHERS
(2) SETS OF BOLTS AND NUTS
(TO ATTACH FRONT
SEAT TO FRAME IS
NOT VISIBLE)
3" DIA PLASTIC
WHEEL
5/16" X 2 1/4" BOLT
3/8" NUT
PAGE 1 OF 3
C-90656W - SUPER BENCH
SLIDE
PIVOT
(1) 5/8" X 6.5" STUD
(2) 5/8" FLAT WASHERS
AND (2) 5/8" LOCK NUTS
REAR LEG
3" FEET (4) PCS
TDS FITNESS EQUIPMENT
POP PIN
HING BOLT:
(1) 3/8" X 7" BOLT,
(2) 3/8" FLAT WASHERS
(1) 3/8" LOCK NUT
REAR SEAT
FRONT SEAT
FRONT LEG
(4) ½"X 4-1/2" BOLTS
(8) ½"FLAT WASHERS
(4) ½" LOCK NUTS
Advertisement
Related Manuals for TDS C-90656W
Summary of Contents for TDS C-90656W
- Page 1 C-90656W - SUPER BENCH ASSEMBLY INSTRUCTIONS: (1) 5/8” X 6.5” STUD (2) 5/8” FLAT WASHERS AND (2) 5/8” LOCK NUTS REAR SEAT (6) 3/8” X 1” BOLTS & (6) 3/8” FLAT WASHERS (2) SETS OF BOLTS AND NUTS (TO ATTACH FRONT...
- Page 2 C-90656W - SUPER BENCH PARTS LIST FRONT SEAT REAR SEAT FRAME LEGS SLIDE FRONT HINGE PIVOT REAR HINGE HARDWARE LIST (2) 5/16 X 2 1/4 BOLTS (4) 5/16 FLAT WASHERS (2) 5/16 LOCK NUTS (6) 3/8 X 1 BOLTS (6) 3/8 FLAT WASHER...
- Page 3 10 - ATTACH FRONT AND REAR SEATS TO BENCH WITH (6) 3/8"X1" BOLTS AND (6) 3/8” FLAT WASHERS NOTE: TO MOVE BENCH, LIFT FRONT FOOT UNTIL THE WHEELS IN THE BACK TOUCH THE FLOOR, THEN ROLL. TDS FITNESS EQUIPMENT PAGE 3 OF 3...