Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ActronAir SCA400C
Summarization of Contents
Introduction
Information About This Guide
Provides installation instructions specific to your split ducted unit.
Product Inspections
Check unit and components against invoice for damage and verify nameplate details.
Codes, Regulations And Standards
Ensures unit installation complies with relevant council, state/federal codes and standards.
Important Safety Symbols And Labels
Highlights safety symbols and labels indicating potential hazards for user attention.
Safety Instructions
Hazardous Voltage - Risk of Electrocution
Critical safety precautions for handling electrical components and preventing accidental energisation.
Beware of Rotating Fans!
Safety precautions for avoiding injury from moving fan blades and pinch points.
Visual Inspection and Work Assessment
Assessing work areas and conditions for potential hazards before starting tasks.
Installation Information
Recover and Recycle Refrigerants
Guidelines on responsible refrigerant recovery, recycling, and disposal practices.
Refrigerant Handling and Safety
Consulting MSDS for proper handling, safety, storage, and disposal requirements.
Service Equipment and Recovery Procedures
Using appropriate equipment for refrigerant recovery and evacuation to minimize emissions.
Installation Preparation
Key considerations before commencing unit installation, including verification and site preparation.
Unit Dimensions, Clearances and Weights
Unit Dimensions
Provides overall nominal dimensions, mounting distances, and pipe sizes for various models.
Minimum Service Access Area, Airflow Clearances and Weights
Specifies required clearances for service, airflow, and unit weights for different models.
Unit Lifting Procedure
Crane Lifting Method
Instructions for safely lifting the unit using a crane and spreader bars.
Fork Lift Method
Guidance on safely moving the unit using a forklift.
Field Pipe Connection
Piping and Brazing
Details on connecting field pipes, brazing procedures, and refrigerant handling for R-410A.
Pressure Testing
Procedure for pressurizing and testing the system for leaks.
Evacuation Procedure (Triple Evacuation)
Step-by-step guide for performing a triple evacuation of the system.
Electrical Installation
Live Electrical Supply
Critical safety warnings for working with live electrical components.
Static Sensitive Electronic Devices
Precautions for handling sensitive electronic components to prevent damage.
Wiring Diagram
Information on locating and using wiring diagrams for installation.
Supply and Power Requirements Procedure
Installer's responsibility for providing power supply wiring and checking compatibility.
Compressor Voltage Balance Requirement
Checking voltage balance in three-phase systems to prevent motor issues.
Refrigerant Charging
Checking for Subcooling
Method to calculate and adjust system subcooling for optimal performance.
Checking for Superheat
Method to calculate and adjust system superheat for optimal evaporator performance.
Maintenance
Maintenance Safety Precautions
Critical safety warnings related to electrical hazards and voltage during maintenance.
Annual Maintenance Checklist
A checklist for routine annual inspections of electrical and outdoor unit components.
Condenser Coil Cleaning Procedures
Detailed steps, cautions, and methods for safely cleaning condenser coils.
Need help?
Do you have a question about the SCA400C and is the answer not in the manual?
Questions and answers