Advertisement

Exterity AvediaPlayer r92xx series V1.1
Administrator's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AvediaPlayer r9200 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Important Safety Instructions
USA and Canada
Safety instructions specific to USA and Canada regulations and practices.
General Safety Warnings
Critical warnings for product operation, electrical safety, and environmental conditions.
1 Summary
Scope
Defines the scope of the manual, including firmware version and applicable products.
Audience
Identifies the intended users of the manual, such as system integrators and administrators.
Terms and definitions
Lists and defines technical terms and acronyms used throughout the document.
2 The AvediaPlayer r92xx Series Receivers
Power
Explains how the receiver is powered, including PoE and external supplies.
Network Considerations
Discusses network requirements, multicast support, and IGMP for optimal receiver operation.
Stream Playback
Details the supported video and stream playback formats.
Audio Decoding
Lists supported audio stream formats and output options.
Channel Discovery
Explains mechanisms for discovering channels, including SAP and XML lists.
Remote Control
Describes IR and wired remote controls and their customisation.
AvediaPlayer r9200 Receiver
Details the features of the AvediaPlayer r9200 model.
AvediaPlayer r9210 Receiver
Outlines the additional analogue outputs of the AvediaPlayer r9210.
AvediaPlayer r9220 Receiver
Describes the integrated switch and VLAN support of the AvediaPlayer r9220.
Device Administration
Covers methods for configuring and managing the receiver.
Physical Location
Discusses how and where to physically place and mount the receiver.
Receiver Development Kit (RDK)
Introduces the RDK for creating custom solutions and third-party applications.
3 Getting Started
Attach the AvediaPlayer to a Display or Surface
Describes how to attach the receiver to a display or surface using mounting brackets.
Connect to the Display Device
Details connecting the receiver to a suitable display device via HDMI or analogue outputs.
Powering the AvediaPlayer Receiver
Explains how to power the receiver using PoE or an external power supply.
Connect to the Network
Guides on connecting the receiver to the network via Ethernet ports.
Configure the IP Address of the AvediaPlayer Receiver
Outlines methods for assigning IP addresses, including DHCP and static configuration.
Configure Name and Location
Explains how to set a name and location for easy identification of the receiver.
Configure Receiver Properties
Details configuring receiver properties for stream discovery and display.
Checking Status
Describes how to check the receiver's operating status via display or web interface.
4 AvediaPlayer Physical Interfaces
Front Panel
Describes the front panel components, including the IR receiver window and status LED.
Rear Panel Interfaces
Details the rear panel connectors common to all r92xx series receivers.
Common Rear Panel Connections
Details common rear panel connectors like PWR, Ethernet, Reset, IR, Serial, TOS, USB, and HDMI.
AvediaPlayer r9210 Specific Connections
Describes the analogue audio, component, composite, and S-Video outputs unique to the r9210 model.
AvediaPlayer r9220 Specific Connections
Details the additional Ethernet ports on the r9220 model for network expansion.
Kensington Lock Slot
Explains the location and purpose of the Kensington security lock slot on the receiver.
5 Remote Control
Remote Control Key Functions
Details the functions of buttons on the IR and wired remote controls.
Inserting Batteries
Provides instructions on how to insert batteries into the remote control.

Table of Contents