Advertisement
Quick Links
TPS II
Single Channel Current Transducer System
Installation Manual
MA TPS II CT, Ver. 1.0
1
11/2021
SIGNALTEC GmbH, Reutersbrunnenstrasse 27, D-90429 Nürnberg, GERMANY, T. +49 911 2550993-0, F. +49 911 2550993-13, Email: info@signaltec.com, Web: www.signaltec.com
Advertisement
Related Manuals for Signaltec CT 500
Summarization of Contents
Introduction and Goods Receipt
Receiving of Goods
Details the process of receiving and verifying the TPS system components upon delivery.
Hardware Installation
Connect TPS Output to Meter Input
Connects the transducer output current to the current input terminals of a current or power meter.
Connect Voltage Output Module to Multimeter
Connects the optional voltage output module to a multimeter's voltage input terminals.
Scaling Options
Current Output Ratio Scaling
Details current output ratios and scaling factors for various TPS transducer models.
Scaling with Passive Plug-on Resistors
Lists sensor output ratios and scaling factors when using passive plug-on resistors.
Scaling with Active Plug-on Amplifiers
Lists sensor output ratios and scaling factors when using active plug-on voltage amplifiers.
Status Readout Interface
25-pole D-SUB Pin-out
Details the pin-out configuration for the 25-pole D-SUB status-readout interface.
Specifications Overview
TPS Rack Specifications
Provides dimensions, general data, and electrical specifications for the TPS rack unit.
Transducer Specifications
Details technical specifications for various TPS transducer models, including range and error.
Connection Cables
Covers standard connection cables, their specifications, and total measuring resistance.
Burden Modules
Describes passive burden resistors and active voltage amplifiers, including specifications.
Need help?
Do you have a question about the CT 500 and is the answer not in the manual?
Questions and answers