Advertisement
Quick Links
TPS II
Single Channel Current Transducer System
Installation Manual
MA TPS II CT, Ver. 1.0
1
11/2021
SIGNALTEC GmbH, Reutersbrunnenstrasse 27, D-90429 Nürnberg, GERMANY, T. +49 911 2550993-0, F. +49 911 2550993-13, Email: info@signaltec.com, Web: www.signaltec.com
Advertisement
Related Manuals for Signaltec CT 400
Summarization of Contents
3. Hardware Installation
3.1. Connection of the TPS current output terminals to the current input terminals of a current- or power-meter
Connects transducer output to current input of meters using D-SUB cable and safety leads.
3.2. Connection of the optional plug-on voltage output module to the voltage input terminals of a multimeter
Connects transducer output to multimeter voltage input via voltage modules.
4. Operating instructions
Power and Status Indicators
Details the meaning of Power-LED and Status-LED states for system and transducer status.
5. Scaling
5.1. Current output ratio
Lists current output ratios and scaling factors for different TPS transducers.
5.2. Sensor output ratio when using the passive plug-on resistors
Details sensor output ratios and scaling factors with passive burden resistors.
5.3. Sensor output ratio when using the active plug-on voltage amplifiers
Details sensor output ratios and scaling factors with active voltage amplifiers.
6. Status-Readout-Interface
6.1. Pin-out of the 25-pole D-SUB
Provides pin-out details for the 25-pole D-SUB connector for status readout.
7. Specifications
7.1. TPS Rack
Details the dimensions, general data, and electrical specifications of the TPS rack.
7.3. Connection cables
7.3.1 Standard Connection Cables
Lists order numbers, lengths, cross-sections, and resistances of standard connection cables.
7.3.2 Total Measuring Resistance at Full Scale
Provides maximum measuring resistance values for each transducer type at full scale.
7.4. Burden modules
7.4.1. Passive plug-on burden resistors
Details passive plug-on burden resistors, their specifications, and scaling combinations.
7.4.2. Active plug-on voltage amplifiers
Details active plug-on voltage amplifiers, their specifications, and scaling combinations.
Need help?
Do you have a question about the CT 400 and is the answer not in the manual?
Questions and answers