Presetting Fm/Am Stations Manually; Selecting Preset Stations; Erasing Presets - Onkyo CS-345 Instruction Manual

Listening to the Radio

Presetting FM/AM Stations Manually

With the Preset Write function, you can manually preset
individual FM and AM radio stations. Presets make it
easy to select your favorite stations and eliminate the
need to tune the radio manually each time you want to
change stations.
FM stations can also be preset automatically (see
page 26).
PRESET C/U
INPUT

Selecting Preset Stations

You must store some presets before you can select them
(see pages 26 to 27).
1 Press the [TUNER] button, or the [INPUT]
button on the top panel, repeatedly to select
"FM" or "AM".
The preset you selected the last time you listened to
the radio will be selected.
2 Use the PRESET []/[] buttons to select a
preset.
Press the PRESET [] button to select the
previous preset. Press the PRESET [] button to
select the next preset.
—Continued
PRESET C/U
About Presets
You can store up to 30 FM and 30 AM stations as presets.
1 Tune into the station that you want to store
as a preset (see page 26).
2
Press and hold down the [PRESET
MEMORY] button to the preset number
flashes.
When the preset has been stored, the preset number
will change from blinking to steadily lit.
Preset numbers are automatically stored starting
with the lowest unused number.
If all 30 FM or 30 AM presets have been set, the
display will indicate "Preset FULL," and no further
presets can be stored. You'll need to erase an
existing preset before storing another one.
TUNER
Tip:
• If you press the remote controller's [TUNER] button
while the CD receiver is on Standby, it will turn on
automatically and the station that you listened to last
time will be heard.

Erasing Presets

1 Select the preset you want to erase.
2 Press and hold down the [CLEAR] button to
erase the preset.
When the preset has been erased, presets following
the erased preset will be renumbered forward and
redisplayed.
CLEAR
27
En-