How To Use; Steamer Description; Before You Begin Cleaning; Filling Clean Water Tank - Hoover Enhanced Clean WH20200 Owner's Manual

2

how to use

steaMer desCriPtion

1. Handle
2. Upper Cord Hook (Rotating
Quick Release Cord Hook)
3. Lower Cord Hook (Fixed
Cord Hook)
4. Power Cord
5. Clean Water Tank
6. Power Button
7. Floor Head
8. Steam Release Trigger
9. Solution Tank
10. Clean Control Dial
11. Power Indicator Light
Blue Light = Unit On
12. Steam Ready Indicator Light
Green Light = Steamer Ready
No Light = Steam NOT Ready
Accessories
13. Multi-Surface Microfiber Pad (2)
14. Hard Floor Microfiber Pad
15. Carpet Glider
16. Measuring Cup
17. Hard Water Filter (Pre-
assembled in steamer,
remove front tank to
expose filter)
18. Cooling Base
TECHNICAL SPECIFICATION
Model Number: WH20200
Input Power: AC 120V / 60Hz / 12A

beFore You beGin CleaninG

FillinG Clean water tank

WARNING
!
To reduce the risk of personal injury, unplug
the steamer when assembling the steamer.
Do not use hot or boiling water to fill clean
water tank.
„
Remove the clean water tank (2.2) on the
FRONT of the Steam Mop.
„
Twist the cap counter clockwise to remove (2.3).
„
Fill the water tank with 500ml of water. Using the
measuring cup provided, fill twice to the 250ml
mark indicated and pour water into tank (2.4).
Replace the water cap and twist clockwise until
tightly secure.
„
Ensure hard water filter is in place (see 3.5).
„
Slide the clean water tank down and snap
into place (2.5).
2.1
Front
1
4
17
10
11
13 14
2.2
!
2.4
7
8
3
5
6
12
7
15 16
Accessories
2.3
2.5
back
2
9
17 18