Advertisement
YMEP#18016 - V2
LICENSED PRODUCT
Yamaha, the Crossed Tuning Fork Design, and any likeness thereof are trademarks
of Yamaha Motor Corp. U.S.A. and Yamaha Motor Co., Ltd. ("Yamaha") used
under license by Sport Dimension Inc. www.yamaha-motor.com.
This Product is not manufactured by Yamaha. For consumer purposes,
please contact Sport Dimension Inc. at 1-800-678-7873.
SCOUT | SEAL | EXPLORER
User Manual
English Version
CAUTION
ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 8 years of age. As with all
electrical products, precautions should be observed during handling
to reduce the risk of electric shock.
Advertisement
Related Manuals for Yamaha Seascooter Seal
Summarization of Contents
Parts Diagrams and Identification
SCOUT Model Parts
Lists and identifies the components of the SCOUT seascooter model.
SEAL Model Parts
Lists and identifies the components of the SEAL seascooter model.
General Warnings and Cautions
Device Limitations and Hazards
Covers non-life-saving use, transport hazards, and user responsibilities.
Age and Supervision Requirements
Specifies age limits and the necessity of adult supervision for operation.
Detailed Safety Guidelines
Safe Operating Environment
Advises on inspecting the swimming area and awareness of water conditions.
Propeller and Clothing Safety
Warns against placing body parts or clothing near the propeller.
Battery Safety and Handling
Covers battery charging, storage, and general safety rules.
Operational Restrictions
Details alcohol/drug use, attachment rules, and water condition impacts.
Fitting Rubber Seal (SEAL Model)
SEAL Step 1: Nose Cone Removal
Instructions for unlocking latches and removing the nose cone.
SEAL Step 2: Seal Lubrication
Details fitting and lubricating the rubber seal with grease.
Fitting Rubber Seal (EXPLORER Model)
EXPLORER Step 1: Nose Cone Removal
Instructions for unlocking latches and removing the nose cone.
EXPLORER Step 2: Seal Lubrication
Details fitting and lubricating the rubber seal with grease.
Getting Started with Your Seascooter
Scout Operation Guide
Guides on using the SEASCOOTER SCOUT, including switch and trigger use.
Seal and Explorer Operation Guide
Guides on using SEASCOOTER SEAL/EXPLORER, including safety lock and triggers.
Battery Use and Safety Precautions
Battery Charging Frequency
Advises on recharging the battery at least every three months.
Battery Compatibility Warning
Stresses using only the original Seascooter battery for safety.
General Battery Handling
Provides guidance on battery removal, ventilation, and temperature limits.
Detailed Battery Charging Procedures
Charging Best Practices
Ensures charging to maximum, in ventilated areas, away from ignition sources.
Charging Sequence
Steps for connecting and disconnecting the charger and battery.
Post-Charge Safety
Advises waiting after charging to allow gases to dissipate.
Charging the Battery for SCOUT
SCOUT Charging Preparation
Ensures Master Switch is off and the unit is dry before charging.
SCOUT Battery Disconnection
Instructions for disconnecting the battery cable from the housing.
SCOUT Charging Process
Details connecting battery to charger, charging time, and LED indicators.
SCOUT Post-Charge and Reassembly
Covers standing time, unplugging, and reconnecting the battery.
Charging the Battery for SEAL/EXPLORER
SEAL/EXPLORER Charging Setup
Ensures safety lock is off and the unit is dry before charging.
SEAL/EXPLORER Battery Removal
Instructions for pulling latches, removing nose cone, and disconnecting battery.
SEAL/EXPLORER Charging Steps
Details connecting battery cable to charger and plugging into mains.
Battery Replacement and Purchase
Replacing a Flat Battery
Steps to replace a flat battery with a fully charged one.
Buying Additional Batteries
Guidance on purchasing extra rechargeable batteries.
SEAL/EXPLORER Detailed Charging
SEAL/EXPLORER Charging Duration
Details charging time (14-16 hours) and LED indicators.
SEAL/EXPLORER Post-Charge Steps
Covers disconnecting charger, allowing battery to stand, and installing.
SEAL/EXPLORER Seal Maintenance
Ensures seal and surfaces are clean and lubricated before reassembly.
Replacing Battery in SEAL/EXPLORER
SEAL/EXPLORER Battery Swap Procedure
Steps for opening, disconnecting, removing, and installing battery.
SEAL/EXPLORER Reassembly
Follows steps for closing and locking the seascooter.
Consumer Warranty and Service Information
Warranty Coverage and Limitations
Details the limited warranty, coverage periods, and exclusions.
Warranty Claims Process
Explains how to obtain warranty service and customer responsibilities.
Need help?
Do you have a question about the Seascooter Seal and is the answer not in the manual?
Questions and answers