Related Manuals for Memorex MSS4001 - LuxLAB Customizable + Portable Speakers
Summary of Contents for Memorex MSS4001 - LuxLAB Customizable + Portable Speakers
- Page 1 MSS4001 User’s Guide Orb Speaker System Before operating this product, please read these instructions completely.
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This Caution Marking is located at the bottom enclosure of the unit. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the... - Page 3 SAFETY PRECAUTIONS INFORMATION: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the...
-
Page 4: Location Of Controls
LOCATION OF CONTROLS FRONT 1. Left Speaker with Interchangeable Speaker Rings 2. Speaker Stand 3. Power/Volume Control 4. Right Speaker with Interchangeable Speaker Rings 5. Power Indicator REAR 1. LINE IN Jack 2. DC IN Jack 3. L (Left) Audio Out Jack 4. -
Page 5: Power Source
POWER SOURCE USING AN ADAPTER (INCLUDED) Plug the small end of the AC adapter into the DC IN jack on the rear of the right speaker. Connect the other end (with two blades) into an AC outlet having 120V, 60Hz AC only. NOTES: •... -
Page 6: Operation
OPERATION Plug the unit in or insert batteries as described on page 4. Place each speaker on the Speaker stand, if desired. Insert one side of the audio cable's plug into the L (Left) Audio Out Jack on the Right speaker and the other side into the Audio In Jack on the left speaker. - Page 7 CHANGING THE SPEAKER RINGS Four Speaker Rings are included and can be changed as follows: To remove speaker ring, push in Gently pull the speaker ring out. on the speaker ring, then rotate it counter-clockwise. To replace, position the tabs of the Rotate the speaker ring clockwise speaker ring onto the speaker as until it is locked into place...
-
Page 8: Specifications
PLEASE VISIT OUR WEBSITE AT: WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT (954) 660-7100. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. PARTS ACCESSORIES, CONTACT INTERNATIONAL AT 1-800-321-6993. - Page 9 Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com...
Need help?
Do you have a question about the MSS4001 - LuxLAB Customizable + Portable Speakers and is the answer not in the manual?
Questions and answers