Cpu Heatsink - Dell DX6004S Hardware Owner's Manual

Table 1-1. LCD Status Messages
Code Text
E1414 CPU # temp
exceeding
range. Check

CPU heatsink.

E1418 CPU # not
detected.
Check CPU is
seated
properly.
E141C Unsupported
CPU
configuration.
Check CPU or
BIOS revision.
E141F CPU # protocol
error. Power
cycle AC.
E1420 CPU Bus parity
error. Power
cycle AC.
(continued)
Causes
Specified processor is out
of acceptable temperature
range.
Specified processor is
missing or bad, and the
system is in an
unsupported
configuration.
Processor is in an
unsupported
configuration.
The system BIOS
has reported a processor
protocol error.
The system BIOS has
reported a processor bus
parity error.
Corrective Actions
Ensure that the processor
heat sink is properly
installed. See
"Troubleshooting the
Processor" on page 150
and "Troubleshooting
System Cooling
Problems" on page 143.
Ensure that the specified
microprocessor is
properly installed. See
"Troubleshooting the
Processor" on page 150.
Ensure that your
processor matches and
conforms to the type
described in the processor
technical specifications
outlined in your system's
Getting Started Guide.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 161.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 161.
About Your System
25