Dell DX6000G Hardware Owner's Manual page 97

NOTE:
To avoid interference with other components, the maximum allowable
dimensions of the USB key are 24 mm (.94 in) wide x 79 mm (3.11 in) long x 8.6 mm
(.33 in) high.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 80.
3 Locate the USB connector on the control panel board. See Figure 3-11.
4 Insert the USB memory key into the USB connector.
5 Close the system. See "Closing the System" on page 81.
6 Reconnect the system to power and restart the system.
Figure 3-11. Removing and Installing a USB Memory Key
1 USB memory key
1
2
2 USB memory key connector
Installing System Components
97