Dell DX6000G Hardware Owner's Manual page 43

Hardware owner's manual
Hide thumbs Also See for DX6000G:
Table of Contents

Advertisement

Table 1-2. System Messages
Message
No boot device
available
No boot sector on
hard drive
No timer tick
interrupt
PCIe Training
Error: Expected
Link Width is x,
Actual Link Width
is y.
(continued)
Causes
Faulty or missing optical
drive subsystem, hard drive,
or hard drive subsystem, or
no bootable USB key
installed.
Incorrect configuration
settings in System Setup
program, or no operating
system on hard drive.
Faulty system board.
Faulty or improperly
installed PCIe card in the
specified slot.
Corrective Actions
Use a bootable USB key,
optical drive, or hard drive.
If the problem persists,
see "Troubleshooting an
Optical Drive" on page 151,
"Troubleshooting a USB
Device" on page 142,
"Troubleshooting an Internal
USB Key" on page 150, and
"Troubleshooting a Hard
Drive" on page 152.
See "Using the System Setup
Program and UEFI Boot
Manager" on page 55 for
information on setting the
order of boot devices.
Check the hard drive
configuration settings in the
System Setup program.
See "Using the System Setup
Program and UEFI Boot
Manager" on page 55.
If necessary, install the
operating system on your
hard drive. See your
operating system
documentation.
See "Getting Help" on
page 169.
Reseat the PCIe card in the
specified slot number.
See "Troubleshooting
Expansion Cards" on
page 155. If the problem
persists, see "Getting Help"
on page 169.
About Your System
43

Advertisement

Table of Contents
loading

Table of Contents