Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sokkia SDL50
Summarization of Contents
Precautions for Safe Operation
Definitions of Indications
Explains the meaning of WARNING and CAUTION symbols for user safety.
General Safety Precautions
General safety guidelines for instrument operation and handling.
Staff, Tripod, and Power Supply Safety
Safety precautions for staff, tripod, and power supply usage.
Precautions
Exceptions from Responsibility
Outlines the manufacturer's limitations of liability for product usage and misuse.
SDL Functions
Parts of the Instrument and Operation
Identifies and describes the components and operational parts of the SDL30/50 instrument.
Display
Explains the various marks and indicators on the instrument's display screen.
Operating Keys
Details the function and usage of the instrument's control keys.
Operating Modes
Describes the different functional modes available on the SDL30/50 instrument.
Basic Operation
Reading the Staff
Explains how to focus on and read the measurement staff using the instrument.
Measuring in Status Mode
Details how to perform measurements while the instrument is in status mode.
Measuring using Wave-and-Read
Describes the procedure for taking measurements using the Wave-and-Read function.
Setting Up Data Storage
JOB Setting
Explains how to set up and manage jobs for storing measurement data.
Record Conditions
Describes how to configure the conditions for recording measurement data.
Double-run Measurement
Explains how to set up and use double-run measurement data.
Flow of Recording Data
Outlines the step-by-step process for recording measurement data.
Setting Out Height Difference, Distance, and Elevation
Setting Out Height Difference
Details the procedure for setting out a point at a specified height difference.
Setting Out Distance
Explains how to set out a point at a specified distance from a benchmark.
Setting Out Elevation
Describes the process for setting out a point at a specified elevation.
Other Measurement Functions
Measuring Horizontal Angle
Explains how to measure the horizontal angle between two points.
Using the Instrument as a Standard Level
Details how to use the instrument as a standard level for readings.
Displaying Recorded Data
Data Check and Edit
Describes how to review and edit recorded measurement data.
Number of Recorded Points
Shows how to check the total number of points recorded in the instrument.
Sending Recorded Data
Connecting to a Computer or Data Collector
Details how to connect the instrument to a computer or data collector for data transfer.
Data Output
Describes how to output recorded data from the instrument to a computer.
Changing the Settings
Measuring Mode
Allows selection of different measuring modes for the instrument.
Fractional/Decimal Representation of Height Units
Configures display format for height units, including decimal and fractional options.
Communication Parameters
Sets communication parameters for connecting external devices like computers or data collectors.
Auto Power-Off
Enables or disables the automatic power-off function to conserve battery.
Unit of Measurement
Selects the display unit for measurements (e.g., meters, feet, inches).
Checks and Adjustments
Adjusting the Circular Level
Provides steps to adjust the circular level for proper instrument leveling.
Adjusting the Reticle
Details the procedure for adjusting the instrument's reticle for accurate measurements.
Equipment and Accessories
Standard Equipment
Lists the standard equipment and accessories included with the SDL30/50.
Optional Accessory
Describes the optional diagonal eyepiece and its installation.
Staffs
Lists and describes different types of staffs compatible with the instrument.
Need help?
Do you have a question about the SDL50 and is the answer not in the manual?
Questions and answers