I/O Deviceconfiguration - Gigabyte GS-R12T4H2 Service Manual

I/O DeviceConfiguration

Serial Port A
This allows users to configure serial prot A by using this option.
Enabled
Disabled
Base I/O Address/IRQ
3F8/IRQ4
2F8/IRQ3
3E8/IRQ7
2E8/IRQ5
Serial Port B
This allows users to configure serial prot B by using this option.
Enabled
Disabled
Figure 2-6: I/O Device Configuration
Enable the configuration. (Default setting)
Disable the configuration.
Set IO address to 3F8/IRQ4.(Default setting)
Set IO address to 2F8/IRQ3.
Set IO address to 3E8/IRQ7.
Set IO address to 2E8/IRQ5.
Enable the configuration (Default setting)
Disable the configuration.
6 5
BIOS Setup