Sample License; Configuring Dx Storage - Dell DX6000 Getting Started Manual

4.1.5. Sample License

Following is a sample license:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
############################################################################
#
# DX Storage License File
#
# License S/N: 200804261512-8402
# Generated By: Eric Smith
# Comments:
#
############################################################################
licenseFormat = 1.1
cn = ACME Widgets, Inc.
street = 123 Street A, Building #23
cl = Austin
st = Texas
postalCode = 78746
co = USA
clusterDescription = Corporate Office
expirationDate = none
featureClusterMaxTB = 5.0
featureMinReps = 1
featureVolumeLifetime = unlimited
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFIHztdRYikRJU1RfMRAusHAKCX9ABhEBgQz/TyTy+gT5gXf7hNmQCeKxLx
R+AgQ2uoR/l+mG4Apx6zgDk==TXHc
-----END PGP SIGNATURE-----

4.2. Configuring DX Storage

This section discusses how to boot and initially configure a DX Storage node.
If you boot DX Storage from a Cluster Services Node (CSN), you can skip this section because
these tasks are performed automatically.
Warning
After performing the tasks discussed in this section, you must make sure that no one
(including your IT personnel and any on-site contractors) boots a non-DX Storage system
from this USB flash drive. If a computer is accidentally booted from a configured USB
flash drive, some or all of its disks could be reformatted, leading to permanent data loss.
Copyright © 2010 Caringo, Inc.
All rights reserved 21
Version 5.0
December 2010