Dell DX6000 Administration Manual page 37

Option Name
cluster
clusterSettingsUUID
consolePort
consoleReportStyle-
URL
consoleStyleURL
defreps
dnsDomain
dnsServers
Copyright © 2010 Caringo, Inc.
All rights reserved
Default
none
none
90
none
none
2
none
none
32
Description
The name of the cluster. Dell strongly
recommends you use an
compatible domain name, such as
cluster.example.com.
In addition, you should create one domain
with the same name as the cluster, which
sets up a default cluster domain that is
used by all objects for which a name is not
specified at the time of their creation. For
more information about creating domains,
see Section 3.7.5, "Managing
To prevent confusion, both in viewing the
cluster from the administration console and
downstream in applications like DX Content
Router that might analyze the source cluster,
Dell highly recommends that all nodes in the
cluster be configured with the same cluster
name.
UUID of the anchor stream that contains
persistent cluster settings. Dell strongly
recommends you add this parameter. This
parameter causes cluster-wide settings to be
preserved when a node reboots.
The UUID value displays on the Cluster
Settings page in the Admin Console after
you save cluster-wide settings. For more
information, see Section 3.7, "Choosing and
Preserving Cluster Settings".
Admin Console's listen port.
URL to report style sheet.
URL to console style sheet.
The default number of stream instances
that must be kept in the cluster if nothing is
specified in the individual stream lifepoints.
This is required to be 1 or higher and it
must be between the values of minreps and
maxreps, inclusive (see below).
Specifies the default domain used for
communicating with external entities
such as syslog or license servers. (Also
commonly referred to as the DNS suffix,
DNS search domain, or local domain name).
For example, .example.com.
DNS name servers separated by spaces.
IANA-
Tenants".
Version 5.0
December 2010