Bernina 2500DCET Instruction Manual page 42

2500_DCE_2_englisch_neu
Threading 4 thread cover stitch (position F)
Cover stitch looper
42
11
10
09.10.2007 14:59 Uhr
(purple markings)
2
7
8
9
Seite 42
1
2
3
4
5
6
Place the spool on the spool
pin as illustrated.
1. Bring the thread up from
the spool and lay it from
the back to the front into
the guide.
2. Thread the first guide.
3. Take the thread through
the groove.
4., 5., 6., 7., 8., Thread
guides
9. Press the lever of the
auto-threader down.
10. Thread the slit of the
threader. Push the auto-
threader lever up and it
will return to its normal
position.
11. Thread the looper eye.
Leave the thread end
(8 cm or 3") hanging in
the machine.
42
42