Bernina 2500DCET Instruction Manual page 32

2500_DCE_1_englisch_neu
Needle C
(green markings)
8
09.10.2007 14:35 Uhr
1
2
3
5
6
4
7
8
Seite 33
2
Overlock threading
Place the spool on the spool
pin as illustrated.
1. Bring the thread up from
the spool and lay it from
the back to the front into
the guide.
2. Thread the first machine
guide.
3. Slip the thread through
the groove.
4., 5., 6. Take the thread
under the thread guide
plate, through the take
up and into the guide.
7. Thread the guide on the
needle clamp.
8. Thread needle C from
front to back and lay the
thread to the left under
the foot.
33