Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Victron energy SmartSolar MPPT 75/15
Summarization of Contents
Safety Precautions
General Safety Precautions
Crucial instructions for safe installation, operation, and maintenance of the charger.
Wiring Safety Precautions
Guidelines for secure and safe wiring of battery and PV connections.
Introduction
Battery, PV Voltage, and Current Rating
Overview of charger capabilities, voltage limits, and current ratings.
Features
Core MPPT Charger Features
Automatic voltage detection, MPPT algorithm, efficiency, and protection.
VictronConnect App and Display Options
Using the app and external displays for monitoring and configuration.
VE.Direct Port and Load Output Management
Connectivity via VE.Direct and controlling DC loads with the output.
Advanced Battery Charging Algorithms
BatteryLife, virtual load output, and adaptive 3-stage charging.
Temperature and Voltage Sensing Integration
Using sensors for compensated charging and voltage loss compensation.
Remote Control and Protection Accessories
Remote on/off functionality and WireBox safety cover.
Installation
Mounting and Battery Connections
Procedures for installing the charger and connecting the battery.
PV Array Configuration and Grounding
Guidelines for PV array setup and system grounding.
Electrical Connections and Display Setup
Step-by-step electrical connections and MPPT Control display setup.
Configuration and Settings
Methods for Changing Settings
Overview of changing settings via VictronConnect, jumper, or display.
Detailed Settings Configuration
Explains changing settings via App, jumper, display and all settings.
Battery Settings Configuration
Detailed configuration for battery voltage, current, presets, expert mode.
Load Output and Streetlight Control
Configuring load output modes and streetlight automation.
TX/RX Port Functionality
Configuring VE.Direct TX and RX ports for external signals.
Firmware Updates and Maintenance
Procedures for updating firmware and handling interruptions.
VE.Smart Network Setup and Operation
Setting up and using the wireless VE.Smart network.
Operation
Start-up and Core Battery Charging
Initial power-up sequence and the primary battery charging process.
Specialized Battery Charging
Automatic equalization and specific settings for lithium batteries.
Monitoring
LED Status Indicators and Error Codes
Interpreting LEDs and understanding error codes for diagnostics.
Monitoring via VictronConnect App
Accessing live data, history, and errors through the app.
Remote Monitoring via GX Device and VRM
Using GX devices and VRM portal for remote monitoring and alarms.
Troubleshooting and Support
Initial Controller and Battery Checks
Diagnosing non-operational controllers and checking battery supply/fuses.
Polarity Issues and Low PV Voltage
Troubleshooting reverse polarity and low PV voltage conditions.
Battery Charging Problems
Addressing issues like undercharging, overcharging, voltage settings, and cable drops.
Solar Performance Issues
Diagnosing low PV yield, output limitations, connection problems, and optimizers.
Communication and Connectivity Issues
Troubleshooting VE.Direct, VE.Smart, and Bluetooth communication problems.
Settings, Firmware, and Load Output Problems
Resolving issues with settings, firmware updates, and load output functionality.
Operation and Unit Specific Issues
Addressing operational problems and unit-specific concerns like sand.
Technical Specifications
MPPT Charger Model Specifications
Detailed technical data for 75/10, 75/15, 100/15, and 100/20 models.
Appendix
Physical Dimensions
Dimensional drawings for various MPPT charger models.
Charger Error Code Overview
Comprehensive list and explanation of all possible charger error codes.
Need help?
Do you have a question about the SmartSolar MPPT 75/15 and is the answer not in the manual?
Questions and answers