Table of Contents
Advertisement
Chassis Roller-wheel Installation
The AW1500-S5 comes with an optional roller-wheel for the chassis for
server transport convenience. Follow these easy steps to mount the
chassis roller-wheels.
To install the roller-wheels, follow these steps.
1. Lay chassis on a side-lying position.
2. Remove the four (4) rubber foot stands.
3. Affix each plastic rubber wheel unit by mounting its screws on
designated slots at the bottom of the chassis.
4. Make sure the screws are tightened accordingly.
All the chassis roller-wheels can be locked individually with
its built-in chassis-roller wheel brake locks.
A-2
chassis roller-wheel brake locks
ASUS AW1500-S5
Advertisement
Table of Contents
