Installing A Dimm; Removing A Dimm - Asus AW1500-S5 User Manual

Intel xeon tower/5u rackmount workstation with 533mhz fsb support

Hide thumbs Also See for AW1500-S5:

Table of Contents

2.4.3 Installing a DIMM

Make sure to unplug the power supply before adding or removing

DIMMs or other system components. Failure to do so may cause

severe damage to both the motherboard and the components.

Follow these steps to install a DIMM.

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket such

that the notch on the DIMM

matches the break on the socket.

Unlocked Retaining Clip

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the DIMM

is properly seated.

Locked Retaining Clip

Follow these steps to remove a DIMM.

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

2. Remove the DIMM from the

socket.

Support the DIMM lightly with

your fingers when pressing

the retaining clips. The DIMM

might get damaged when it

flips out with extra force.

User's Manual

2-11

Table of Contents