Table of Contents
Advertisement
2.4
System memory
2.4.1 Overview
The motherboard comes with four Double Data Rate (DDR) Dual Inline
Memory Module (DIMM) sockets. These sockets support up to 8GB
system memory using 184-pin registered PC2100 DIMMs with Serial
Presence Detect (SPD) and Error Check and Correction (ECC).
PP-DLW
PP-DLW 184-Pin DDR DIMM Sockets
in
•
A DDR DIMM is keyed with a notch so that it fits in only one
direction. DO NOT force a DIMM into a socket to avoid damaging
the DIMM.
•
Only PC2100 supports 533MHz Front Side Bus (FSB);
PC1600/PC2100 supports 400MHz FSB.
The DDR SDRAM technology evolved from the mainstream PC66, PC100,
PC133 memory known as Single Data Rate (SDR) SDRAM. DDR memory
however, has the ability to perform two data operations in one clock cycle,
thus providing twice the throughput of SDR memory. For example, a
200MHz DDR DIMM will support a 100MHz memory bus, and a 266MHz
DDR DIMM will support a 133MHz memory bus.
DDR Data Transfer Rate
266MHz
200MHz
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it
has a 184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a
DDR DIMM is single notched while an SDR DIMM is double notched.
Therefore, a DDR DIMM is not backward compatible with SDR, and should
be installed only in a socket specially designed for DDR DIMMs.
User's Manual
DDR Base Frequency
133MHz
100MHz
2-9
Advertisement
Table of Contents
