JVC VR-616U - 16 Channel Digital Video Recorder Instructions Manual page 23

• Rear
③
① ②
④
⑬
① LAN : Enables screen search and control via Network. (Please use a category 5
cable with a shield.)
② USB Port 1,2 : For backup with external FDD or memory stick. It does not work
both USB1 & 2 at the same time. Please use one of them.
Please turn off the power when you connect external USB with DVR.
!
③ Spare : This terminal is not used.
④ RS-485 : For connecting with external Pan/Tilt camera. (Please use a twisted-pair
cable with a shield.)
⑤ ALARM IN : For alarm input. (Please use a shielded cable.)
ALARM OUT : For alarm output. (Please use a shielded cable.)
⑥ IEEE 1394 Port: Possible to extend storage space or backup by adding external
!
Please turn off the power when you connect external IEEE1394 with DVR.
If you connect external HDD with external CDRW, impossible to recognize.
!
⑦ VGA OUT : Possible to connect with computer monitor. (CRT type)
Please set-up in Menu before use this connector.
⑧ Y/C OUT : Outputs contents of monitor output as a S-VIDEO signal.
⑨ MONITOR OUT 1,2 (Composite) : Menu appears at the time of menu setting and
⑩ SPOT OUT (Composite) : Outputs video which is set-up from the menu.
⑪ MODE(PAL/NTSC) : Selects input video signal mode.
If you change PAL/NTSC, once it carries out operate-off. Operate-on is carried
out, and a message "Video mode was changed! " is displayed and it shows a
subsequent message. Select "O.K.", changes video signal mode.
When PAL/NTSC is changed, former record data is deleted!
!
An administrator password is reset when the PAL/NTSC mode is changed.
Please disable a password setting before changing the PAL/NTSC mode. When
PAL/NTSC mode is changed with a password setting enable, please use a
default password "1234".
⑫ AUDIO : I/O for audio recording/playback.
⑬ VIDEO IN BNC & THROUGH OUT (CH1 ∼ CH16)
: Inputs asynchronous video signal 1.0Vp-p.( 75 ohm )
: Loop out is changed to HI-Z automatically.
⑭ POWER Switch
: This is the main power switch.
⑮ AC INLET : For connecting with power cord.
⑤
⑥ ⑦
IEEE1394 or CDRW.
displays when screen search or recording.
-- 23 --
⑨ ⑩
⑧ ⑪ ⑫
JVC VR-616
⑭
⑮