Pan/Tilt Camera Connection And Control; The Example Of Connection With Tk-C676 Or Tk-C655 - JVC VR-616U - 16 Channel Digital Video Recorder Instructions Manual

3.3 Pan/Tilt Camera Connection and Control

It is possible to control the Pan/Tilt camera without special devices.
The Pan/Tilt camera supports RS-485 and is given an ID for parallel connection.
Easy to install from the menu screen and possible to control by using the Jog Shuttle.
Recommended Cameras:

3.3.1 The example of connection with TK-C676 or TK-C655

Linked with a power connection, control terminal connection, and video signal output
connection. The following figure is the example of connection with 16 sets of TK-C676
or TK-C655.
TK-C676 or
TK-C655
MACHINE ID : 1
Switch 8 : OFF
(RX TERM)
TK-C676 or
TK-C655
MACHINE ID : 2
Switch 8 : OFF
(RX TERM)
TK-C676 or
TK-C655
MACHINE ID : 16
Switch 8 : ON
(RX TERM)
● Camera power connection.
● Control terminal connection (RS-485) : Please use a twisted-pair cable. Connect a
+terminal (TX+) / -terminal (TX-) to the RX+ / RX-terminal of a Pan/Tilt camera. The
camera connected at the end should set-up a terminus (110 Ω).
● Video signal connection (Composite)
: Checks video mode (NTSC/PAL) and inputs video signals at each input terminal.
Manufacturer
JVC
JVC
Control signal cable
Coaxial cable
AC 24 V
power supply
AC 24 V
power supply
AC 24 V
power supply
Digital Video Recorder
VR-616
-- 26 --
Model
TK-C676
TK-C655
JVC VR-616
Monitor